Refer to your owner's manual for the wireless network router or access point you are using to learn how to access the configuration and administration screens and enable and configure MAC address filtering to protect your wireless network.

If you have more than one network adapter you will need to look at through the results to make sure you get the MAC address from the correct adapter. That is the MAC address for that adapter. IP Passthrough can be set to the MAC address of a specific device on your network or by assigning the passthrough to a specific ethernet port on the back of your Hitron (possible ports: 1-4. Find the line labeled physical access address in the resulting information.Type ipconfig /all in the command prompt window and press Enter.You can find the MAC address for your network adapters on your devices by following these steps: It is possible to spoof the MAC address, so an attacker could potentially capture details about a MAC address from your network and pretend to be that device to connect to your network, but no casual hacker or curious snooper will go to those lengths so MAC filtering will still protect you from the majority of users. The MAC address is a unique identifier for networking hardware such as wireless network adapters. If you enable MAC address filtering, only the devices with MAC addresses configured in the wireless router or access point will be allowed to connect. Most wireless network routers and acces points contain the ability to filter devices based on their MAC address.

Pace passthrough mac address